Fire alarm technician jobs in New York City: Abstract Enterprises Security Systems is hiring full-time NICET Level II fire alarm technicians and fire alarm installers, paying $38β$48 an hour. NICET Level II, 3+ years of paid fire alarm experience, a driver's license and your own vehicle are required.
Quick answer: Fire Alarm Technician (NICET Level II), full-time, $38β$48 an hour. Apply with the form; we reply to every application within 48 hours.
Last updated November 20, 2026 by Abstract Enterprises Security Systems · Posting open through February 18, 2027
The fire alarm work we take on is commercial and code-required buildings across the five boroughs: multi-family residential, healthcare and mixed-use. Every job starts from engineer-designed, sealed drawings, and you install to the approved plans through acceptance testing. You won't be doing burglar alarms or houses on this crew.
Multi-family residential and condo buildings
Healthcare and medical offices
High-rise residential towers, some on prevailing-wage jobs
Takeovers of existing systems in occupied buildings
Open positions by borough: Fire Alarm Technician Jobs Brooklyn · Fire Alarm Technician Jobs Queens · Fire Alarm Technician Jobs Bronx · Fire Alarm Technician Jobs Manhattan · Fire Alarm Technician Jobs Staten Island
Outside the city: Fire Alarm Technician Jobs on Long Island · Fire Alarm Technician Jobs in the Hudson Valley
Install, program, test and service commercial fire alarm systems
Work from engineered, sealed drawings and submittals
Troubleshoot devices, wiring faults and panel problems
Support acceptance testing with the authority having jurisdiction
Keep the jobsite clean and documented, and keep the customer informed
A plus:
We're hiring fire alarm technicians and fire alarm installers in New York City who already hold NICET Level II. If you've been searching fire alarm jobs in NYC, NICET jobs, NICET 2 jobs or fire protection jobs in NYC, this posting is for a field tech who installs, programs, tests and services commercial fire alarm systems. NICET Level III and IV techs are welcome and start at the top of the range. Not certified yet? Look at our low voltage technician jobs, where techs can work toward NICET on real jobs.
Installation
Pulling and terminating fire alarm cable, mounting smoke and heat detectors, pull stations, horn strobes and modules from sealed drawings.
Programming
Panel programming and device addressing on Notifier, Edwards EST, Simplex, Siemens and Potter systems.
Testing and inspection
Pre-tests, acceptance tests with the authority having jurisdiction, and annual inspections with written reports.
Service and troubleshooting
Finding ground faults, open circuits and trouble signals, and getting a panel back to normal.
NICET levels we hire: Level II required. Level III and Level IV start at the top of the range.
Also helps: FDNY Certificate of Fitness, OSHA 30, high-rise and prevailing-wage experience.
Not in this posting. This role needs NICET Level II and three years of paid fire alarm experience. If you're starting out, apply for our low voltage technician jobs; that work builds the field experience NICET asks for.
NICET Level II in Fire Alarm Systems at minimum. NICET Level III and IV techs are welcome and start at the top of our pay range.
An installer mostly pulls cable and mounts devices. A technician also programs the panel, tests the system and troubleshoots it. We hire technicians who can do the whole job, start to finish.
Our range is $38β$48 an hour for NICET Level II and up. Where you land depends on NICET level, panel programming skill and FDNY certificates.
Inspection and testing are part of this technician job, not a separate inspector role. If you've done annual inspections and acceptance tests, put that on your application.
| Level | Pay |
|---|---|
| NICET Level II, 3+ years | $38β$42 an hour |
| NICET II with FDNY S-98 and commercial panel programming | $42β$48 an hour |
| Prevailing-wage project hours | Paid the required prevailing rate |
For context, the Bureau of Labor Statistics counted 6,230 security and fire alarm system installers in the New YorkβNewarkβJersey City metro in May 2022, at an average of $27.82 an hour. We post our range up front because New York City's pay transparency law requires it.
Install, program, test and service commercial fire alarm systems from engineered drawings, through acceptance testing. This is not a burglar alarm or residential role.
We pay $38β$48 an hour, based on experience and certifications. That's above the Bureau of Labor Statistics May 2022 average of $27.82 an hour for security and fire alarm installers in the New York metro, because NICET II with commercial panel experience is a step above general installers.
Yes. NICET II in Fire Alarm Systems is required. An FDNY S-98 Certificate of Fitness is a plus.
Apply
Fill out the form with your resume, or email it. Takes two minutes.
We review in 48 hours
We read every application and reply to every one.
Phone screen
A short call about your experience, your license and vehicle, and the work you've done.
Paperwork and start
Hiring paperwork goes through ADP, then you get your first job assignment.