Electrician jobs in New York City: Abstract Enterprises Security Systems is hiring full-time electricians and electrical helpers for conduit work, paying $20β$40 an hour. Conduit bending experience, a driver's license and your own vehicle are required.
Quick answer: Electrician / Conduit Installer (Low Voltage), full-time, $20β$40 an hour. Apply with the form; we reply to every application within 48 hours.
Last updated November 20, 2026 by Abstract Enterprises Security Systems · Posting open through February 18, 2027
This role is for people from the electrical side who can bend pipe. Abstract Enterprises Security Systems is a low voltage contractor, not an electrical contractor: you won't do line-voltage wiring here. You'll run EMT conduit and pull cable for cameras, card readers, intercoms and data, mostly in commercial spaces where exposed cable isn't allowed.
Conduit for camera and access control runs
Exposed runs in warehouses, garages and basements
Raceway and boxes in offices and stores
No line-voltage work: low voltage only
Open positions by borough: Electrician Jobs Brooklyn · Electrician Jobs Queens · Electrician Jobs Bronx · Electrician Jobs Manhattan · Electrician Jobs Staten Island
Bend and run EMT conduit for low voltage cable: offsets, saddles, kicks and 90s with a hand bender
Mount boxes, raceway, strut and cable tray
Pull and fish low voltage cable through conduit, walls and ceilings
Read floor plans and lay out runs before the job starts
Work alongside our low voltage techs on camera, access control and cabling jobs
A plus:
Searching electrician jobs in NYC, electrical helper jobs or low voltage electrician jobs? This posting is for electricians and electrical helpers who can bend and install EMT conduit for low voltage systems: cameras, access control, fire alarm and data cable. It's low voltage only, with no line-voltage wiring. Many electricians move into low voltage because the conduit and wire-pulling skills carry straight over; see our low voltage technician jobs.
Conduit
Bending EMT: offsets, saddles, kicks and 90s, then strapping and fitting it clean.
Pulling wire
Pulling low voltage cable through the conduit you installed, with pull string and fish tape.
Exposed runs
Basements, garages, warehouses and storefronts where cable has to be in pipe.
Support for other crews
Running pipe for our camera, access control and fire alarm techs on commercial jobs.
Who fits: electrical helpers, apprentices and journeymen who can bend pipe and want steady low voltage work.
Yes, if you can already bend basic EMT. Helpers start at the bottom of the range and move up as their conduit work gets faster and cleaner.
An electrician who works on low voltage systems such as cameras, alarms, access control and data cable, instead of power circuits. In this job you install the conduit those systems run in.
No. There's no line-voltage work, so no electrical license is needed. Apprenticeship or helper experience with conduit is what counts.
$20β$40 an hour. Helpers start lower; electricians who bend clean conduit fast and work alone start at the top.
| Level | Pay |
|---|---|
| Helper (less experience, learning the trade) | $20β$27 an hour |
| Experienced (2+ years, works on their own) | $28β$40 an hour |
For context, the Bureau of Labor Statistics counted 6,230 security and fire alarm system installers in the New YorkβNewarkβJersey City metro in May 2022, at an average of $27.82 an hour. We post our range up front because New York City's pay transparency law requires it.
No. We're a low voltage contractor. You'll bend conduit and pull low voltage cable, not do line-voltage electrical work.
Because bending clean conduit is an electrical skill, and plenty of commercial low voltage runs have to go in pipe.
$20β$40 an hour. Helpers with less experience start at the low end; people who bend clean pipe on their own start higher.
Apply
Fill out the form with your resume, or email it. Takes two minutes.
We review in 48 hours
We read every application and reply to every one.
Phone screen
A short call about your experience, your license and vehicle, and the work you've done.
Paperwork and start
Hiring paperwork goes through ADP, then you get your first job assignment.